The Outsunny Picnic Table is a practical and durable addition to any outdoor space, offering a comfortable seating solution for gardens, patios, and family areas. Designed with a spacious tabletop and integrated bench seating, this picnic table features sturdy wooden construction and a stable frame for everyday outdoor use. Its classic slatted design provides ample room for dining, socialising, or leisure activities.
Assembly Precautions
- Parts Verification: Before starting, unpack all components and compare them with the parts list. Pay close attention to part labels and sizes, especially bolts of similar length, to avoid incorrect installation.
- Correct Positioning: Assemble each section according to the illustrated steps, ensuring parts are facing the correct direction. If holes do not line up easily, adjust the positioning rather than applying force.
- Safe Assembly Area: Keep children and pets away from the assembly area. Store small hardware pieces and tools safely during installation to prevent loss or accidental injury.
Parts & Hardware
Parts List
- A: Bench Seat Panels (x2)
- B: Tabletop Panel (x1)
- C: Seat Support Legs (x4)
- D: Table Support Legs (x2)
- E: Side Support Braces (x2)
Hardware List
- F: M4 × 45 Wood Screws (x4)
- G: M8 × 70 Bolts (x8, +1 spare)
- H: M8 Nuts (x16, +1 spare)
- I: M6 × 70 Bolts (x16, +1 spare)
- J: M6 Nuts (x16, +1 spare)
Follow these steps carefully and proceed sequentially to assemble your Outsunny Wood Picnic Table with Umbrella Hole.
Step 1: Attaching Seat Support Legs to the Tabletop Panel
- Place the Tabletop Panel (B) upside down on a flat, soft surface to prevent damage.
- Position two Seat Support Legs (C) at one end of the Tabletop Panel (B), aligning the pre-drilled holes correctly.
- Secure each Seat Support Leg (C) to the Tabletop Panel (B) using M6 × 70 Bolts (I) and M6 Nuts (J).
- Repeat the same process to attach the remaining Seat Support Legs (C) to the opposite end of the Tabletop Panel (B).
- Tighten the bolts lightly at this stage to allow for adjustment in later steps.
Step 2: Installing the Table Support Legs
- Position one Table Support Leg (D) between the previously installed Seat Support Legs (C) on one side of the table.
- Align the fixing holes of the Table Support Leg (D) with the holes in the Seat Support Legs (C).
- Secure the connection using M8 × 70 Bolts (G) and M8 Nuts (H), inserting the bolts through the aligned holes.
- Repeat the same process to attach the second Table Support Leg (D) on the opposite side of the table.
- Tighten the bolts lightly at this stage, leaving room for adjustment in the next steps.
Step 3: Attaching the Bench Seat Panels
- Position one Bench Seat Panel (A) along one side of the frame, aligning it with the installed Seat Support Legs (C).
- Insert M6 × 70 Bolts (I) through the aligned holes and secure them with M6 Nuts (J) on the inside.
- Repeat the same process to attach the second Bench Seat Panel (A) to the opposite side of the frame.
- Ensure both Bench Seat Panels (A) sit evenly and are correctly aligned with the frame structure.
- Tighten the bolts lightly at this stage to allow for final alignment in the following steps.
Step 4: Installing the Side Support Braces
- Position the Side Support Braces (E) diagonally between the inner Seat Support Legs (C), forming a cross shape beneath the table.
- Align the pre-drilled holes of each Side Support Brace (E) with the corresponding holes in the Seat Support Legs (C).
- Secure each end of the Side Support Braces (E) using M4 × 45 Wood Screws (F).
- Ensure the braces are seated flush against the legs before tightening.
- Tighten the screws firmly, but do not overtighten, to avoid damaging the wooden components.
Your Outsunny Picnic Table is now fully assembled and ready to use. Sit back, enjoy the outdoors, and make the most of your time outside!
Safety Precautions
- Place the picnic table on a level, stable surface before use to ensure even weight distribution and prevent movement.
- Do not stand, climb, or jump on the tabletop or bench seats, as this may affect structural stability.
- Ensure all bolts, nuts, and screws are fully tightened before first use and rechecked periodically.
- Distribute weight evenly across the table and benches to maintain balance during use.
- Supervise children during use and ensure the table is used only for its intended purpose.
Care & Maintenance
- Wipe the wooden surfaces regularly with a soft, damp cloth to remove dirt, spills, and outdoor residue.
- Inspect all fixings, support legs, and braces from time to time, tightening them if any loosening is detected.
- Apply a suitable outdoor wood treatment or protective oil periodically to help protect the table from moisture and sun exposure.
- Avoid prolonged exposure to standing water and wipe the surface dry after rainfall.
- When not in use for extended periods or during harsh weather, cover the table or store it in a sheltered area to help extend its lifespan.
You can also download the Outsunny Wood Picnic Table with Umbrella Hole manaul for your reference.
For technical support, replacement parts, or product questions,contact Aosom LLC’s Customer Service and get friendly assistance.
FAQs
1. Some bolt holes were hard to align during assembly. Is this normal?
Yes, slight misalignment can occur before the frame is fully adjusted. Loosening nearby bolts usually allows the holes to line up properly before final tightening.
2. The picnic table feels slightly uneven after assembly. What should I do?
Check that the table is placed on a completely flat surface and loosen the bolts slightly. Adjust the legs until the table sits evenly, then retighten all bolts securely.
3. One leg seems shorter after assembly. Is the product defective?
In most cases, this is caused by uneven bolt tightening or surface placement. Check the ground level and retighten the legs evenly to correct the height.