This Outsunny outdoor dining table offers a spacious and stylish solution for up to six people. Its wood-like tabletop and durable aluminium frame make it perfect for outdoor gatherings and meals. Easy to assemble and built to last, it’s an ideal addition to any patio or garden.
Parts List
- A: Tabletop (2 pieces)
- B: Table Leg (4 pieces)
- C: Corner Bracket (4 pieces)
- D: Table Joint (2 pieces)
Hardware List
- E: M8*40 Screws (8 pieces + 1 spare)
- F: M6*15 Screws (16 pieces + 1 spare)
- G: M8 Washers (8 pieces + 1 spare)
- H: M6 Washers (16 pieces + 1 spare)
- L: M8 Allen Key (1 piece)
- M: M6 Allen Key (1 piece)
Assembly Instructions
Easily assemble your Outsunny Aluminum Outdoor Dining Table for 6 Person – SKU: 84B-917ND by following the detailed instructions for a smooth and secure setup.
Step 1: Attach the Tabletop Slats
Parts Used:
- A: Tabletop (2 pieces)
- D: Table Joint (2 pieces)
Instructions:
- Take the two Tabletop (A) parts and align them side by side.
- Position the two Table Joint (D) parts along the edges of the Tabletop (A).
- Ensure the Table Joint (D) is properly aligned with the Tabletop (A) for a secure fit.
This step prepares the tabletop and leg frame for further assembly.
Step 2: Secure the Table Joint
Hardware Used:
- F: M6*15 Screws (16 pieces)
- H: M6 Washers (16 pieces)
- L: M6 Allen Key (1 piece)
Instructions:
- Align the Table Joint (D) and Tabletop (A) properly.
- Place the M6 Washers (H) on the holes where the screws will be inserted.
- Insert the M6*15 Screws (F) through the Table Joint (D) into the Tabletop (A).
- Tighten the screws using the M6 Allen Key (L) to ensure everything is securely fastened.
This step completes the securing of the legs to the tabletop.
Step 3: Attach the Table Legs and Frame Supports
Parts Used:
- B: Table Leg (4 pieces)
- C: Corner Bracket (4 pieces)
Hardware Used:
- E: M8*40 Screws (8 pieces)
- G: M8 Screws (8 pieces)
- M: M6 Allen Key (1 piece)
Instructions:
- Take the Table Leg (B) parts and align them with the designated holes on the tabletop and frame.
- Attach the Corner Bracket (C) to the corner of the Table Leg (B) and the frame for extra support.
- Using M8*40 Screws (E), secure the Table Leg (B) to the frame by inserting screws into the pre-drilled holes.
- Insert the M8 Screws (G) and tighten them to secure the corner brackets and ensure stability.
- Use the M6 Allen Key (M) to tighten all screws carefully.
This step completes the attachment of the table legs and frame supports.
Final Step: Assembly Complete
Your table is now fully assembled and ready for use! Make sure to check that all screws are tightened properly and the table is stable before placing items on it. Enjoy your new dining table!
Care & Maintenance
- Cleaning: Wipe the table with a damp cloth to remove any dirt or dust. Avoid harsh chemicals or abrasive cleaners.
- Storage: If storing the table for an extended period, place it in a dry, sheltered area to protect it from the elements.
- Tightening: Regularly check that all screws are tight to ensure the table remains stable over time.
Thank you for choosing the Outsunny Aluminum Outdoor Dining Table for 6 Person (SKU: 84B-917ND). With proper assembly and care, your dining table will provide lasting durability and enhance your outdoor space. For assistance, replacement parts, or any questions, Aosom Customer Support is here to help.
FAQs
1. How can I ensure the table stays stable on uneven ground?
To stabilize the table on uneven ground, adjust the M6 Washers (H) or use the Leveling feet (if included) to balance the table. You can also place small rubber pads or furniture coasters under the legs to create a level surface.
2. What should I do if I cannot align the holes for the screws during assembly?
If the holes aren’t aligning properly, double-check the positioning of the Tabletop (A) and Leg Frame (D) to ensure they are correctly aligned. If necessary, gently loosen the screws and adjust the parts before tightening again.
3. Can I disassemble and reassemble the table if needed?
Yes, the Outsunny Aluminum Outdoor Dining Table is designed to be disassembled and reassembled. If you need to move it or store it, simply follow the same assembly instructions in reverse. Be sure to keep the screws and washers in a safe place for future use.