This Outsunny 2-seater steel garden bench combines durability, style, and outdoor comfort in one elegant design. With its chic backrest pattern, solid metal frame, and powder-coated finish, it offers a stable and attractive seating option for any patio, lawn, or garden.
Safety & Usage Information
Intended Use
This bench is designed only for domestic use. It is not intended for commercial or heavy public use.
Use Tips
- Place the bench securely on a flat, stable surface.
- Position the bench in a sheltered outdoor area whenever possible.
- Keep the bench clear of open flames or extreme heat sources.
- Do not hang or suspend objects from any part of the bench.
- Avoid exceeding the maximum weight capacity of 528 lbs (240 kg).
- Do not sit on the bench during storms or strong winds.
- Cover the bench during adverse weather or extended periods of non-use.
Parts List
- A ×1 — Left Side Frame
- B ×1 — Right Side Frame
- C ×1 — Decorative Backrest Panel
- D ×1 — Slatted Seat Panel
Hardware List
- E ×4 — M6×50 Bolts
- F ×4 — M6×55 Bolts
- G ×8 (+1 spare) — M6 Washers
- H ×4 — M6 Nuts
- I ×1 — Allen Key (M6)
- J ×1 — Wrench (M6)
Precautions Before Assembly
- Prepare a clean, dry area for assembly.
- Confirm that all parts and hardware are present.
- Ensure no parts are damaged or bent before beginning.
Assembly Instructions
Follow the steps below to assemble your Outsunny Steel Garden Bench (SKU: 84B-754) safely and correctly.
Step 1: Attach the Seat Panel to the Side Frames
- Set the Left Side Frame (A) and Right Side Frame (B) upright.
- Position the Slatted Seat Panel (D) between the frames, aligning all holes.
- Insert an M6×50 Bolt (E) into each hole from the outside.
- Place an M6 Washer (G) on each bolt from the inside.
- Secure with an M6 Nut (H), leaving bolts slightly loose for alignment.
Step 2: Attach the Decorative Backrest Panel
- Position the Decorative Backrest Panel (C) between the upper mounting points of each side frame.
- Align the holes on the backrest with the holes on the frames.
- Insert an M6×55 Bolt (F) through each hole from the outside.
- Add an M6 Washer (G) to each bolt on the inside.
- Leave bolts slightly loose to allow adjustment.
Step 3: Check Alignment and Fully Tighten All Hardware
- Ensure the Seat Panel (D) and Backrest Panel (C) sit evenly and align properly.
- Check that the bench stands level on all four legs.
- Fully tighten all M6×50 (E) and M6×55 (F) bolts.
- Confirm all Washers (G) and Nuts (H) are secure.
- The bench is now ready for use.
Maintenance
- Clean the bench with a soft cloth to maintain its finish.
- Regularly remove leaves and water from the seat and frame.
- Inspect hardware periodically and tighten if needed.
- Avoid harsh chemicals that could damage the powder coating.
Storage Conditions
- Store the bench in a completely dry place if not used for an extended period.
- Ensure the bench is fully dry before covering or storing to prevent mold or rust.
- Using a furniture cover can extend the lifespan of the finish.
Troubleshooting
| Issue | Possible Cause | Solution |
| Bench feels uneven | Legs not aligned | Loosen bolts, adjust frame, retighten |
| Wobbling structure | Hardware not fully tightened | Check all bolts, nuts, and washers |
| Backrest not fitting properly | Holes misaligned | Loosen seat bolts first, realign, then tighten |
| Metal noise when sitting | Loose nuts/washers | Inspect and tighten all hardware |
Thank you for choosing Outsunny, a brand committed to durability, comfort, and timeless outdoor design. If you ever need assistance with assembly, replacement parts, or product-related questions, the Aosom LLC Customer Service Team is always here to help ensure a smooth and reliable experience.
FAQs
1. Can I add cushions or padding to the bench, and will it affect durability?
Yes, you may use outdoor-safe cushions for added comfort. Choose weather-resistant fabrics to prevent moisture buildup. Cushions will not affect the bench’s durability as long as they are kept dry and cleaned regularly.
2. Is it normal for the bench to feel cold or hot depending on the weather?
Yes. Powder-coated steel can warm up in direct sun and feel cooler in low temperatures. To improve comfort, place the bench in a partially shaded spot or use cushions to regulate surface temperature.
3. Can the bench be moved frequently, or will that loosen the hardware?
The bench can be moved as needed, but frequent relocation may gradually loosen the bolts. After repositioning the bench, it’s a good practice to quickly check and tighten any hardware if needed to maintain stability.