The Outsunny 2 Seater Porch Swing with Cup Holders is a charming and functional addition to any outdoor space. Designed to provide a comfortable seating experience, this swing chair features a spacious two-seat design with durable fir wood construction and a waterproof painted finish. With built-in cup holders on each armrest, it offers a perfect place to relax with a drink in hand.
Before You Begin
- Estimated Assembly Time: 45 min – 60 min
- Recommended Personnel: 1-2 adults
- Assembly Surface: Work on a flat, soft surface to protect the wooden panels from dents, scratches, or uneven alignment. This will also ensure all components are assembled accurately and securely.
Parts & Hardware
Parts List
A – Left Armrest
B – Right Armrest
C – Armrest Support Front
D/D1– Armrest Support Back
E – Cup Holder
F – Backrest Slat Panel
G – Seat Backrest Slat
H – Seat Slat Panel
I – Swing Suspension Chains
Hardware List
1 – M4*40 Screws (x08)
2 – M10*65 Bolts (x08)
3 – M4*35 Screws (x04)
4 – M4*30 Screws (x08)
5 – L40 Bolts (x02)
6 – L80 Bolts (x02)
7 – Wing Nut Tightener (x02)
8 – Allen Key (x01)
Follow these steps carefully and proceed sequentially to assemble your Outsunny 2 Seater Porch Swing Chair Seat with Cup Holders.
Step 1: Assembling the Armrests and Backrest Support
- Attach the Left Armrest (A) to the Armrest Support Front (C) using M4 Screws (1).
- Attach the Right Armrest (B) to the Armrest Support Front (C) using M4 Screws (1).
- Connect the (D1) to the armrests, stabilizing the seat and backrest structure.
- Attach the Cup Holder (E) to both Left Armrest (A) and Right Armrest (B) for added convenience.
Step 2: Attaching the Seat Slat Panel and Backrest Slat Panel
- M10 Bolts (2) are used to connect the Seat Slat Panel (H) to the Backrest Slat Panel (F).
- These bolts are fastened with the accompanying washers to ensure a secure fit and stability.
Step 3: Attaching the Backrest Slat Panel and Support Frame
- Align the Seat Backrest Slats (G) with the backrest frame, ensuring they fit securely into place.
- Insert the M4 Screws (3) through the slats into the frame. Use 4 screws to secure them.
- Tighten the screws evenly, making sure the slats are firmly attached but avoid over-tightening.
- Check for alignment to ensure the slats are evenly spaced and securely fixed.
Step 4: Attaching the Armrests to the Seat
- Position the Left Armrest (A) and Right Armrest (B) on the seat slat panel (H), ensuring they are properly aligned with the seat.
- Insert the M10 bolts (2) through the holes in the armrests and the seat slat panel.
- Secure the armrests by tightening the bolts. Ensure they are tightly fastened, but avoid over-tightening.
- Verify the armrests are aligned with the seat before final tightening. Ensure no misalignment before completing the step.
Step 5: Attaching the L80 Bolts to the Seat Frame
- Attach the Left Armrest (A) and Right Armrest (B) to the Seat Slat Panel (H) using L40 Bolts (5).
- Use the L80 Bolts (6) to secure the armrests more firmly to the backrest frame.
- Tighten all L40 and L80 bolts firmly, ensuring the armrests are securely attached to the Seat Slat Panel.
- Ensure that both armrests are aligned evenly with the Seat Slat Panel before final tightening.
Step 6: Attaching the Swing Suspension Chains
- Attach the Swing Suspension Chains (I) to the Swing Frame at the top, ensuring they are securely fastened.
- Use the hooks to connect the suspension chains to the frame.
- Adjust the chains to make sure they are evenly distributed and provide the proper height for the swing.
- Once the chains are attached, test the swing by gently lifting it to ensure that it is securely hanging and balanced.
Final Step: Ensuring Stability
- The swing frame is now fully assembled with the suspension chains (I) properly attached.
- The armrests, seat slats, and backrest slats are securely in place, ensuring the swing is ready for use.
- Ensure all bolts and screws are tightened properly.
- Verify that the swing is securely hanging and stable before use.
- Make sure the swing is hanging at the desired height and is level.
- Gently test the swing by applying some weight to ensure it is safe and functional.
Your Outsunny 2-Seater Porch Swing Chair is now fully assembled. It’s ready for you to enjoy in your outdoor space. Sit back, relax, and unwind in comfort!
Safety Precautions
- Check the suspension chains and bolts regularly for wear or damage.
- Avoid exceeding the recommended weight capacity to ensure safety.
- Keep the area around the swing clear of obstacles and sharp objects.
Care & Maintenance
- Clean the swing regularly with a soft cloth to remove dust and dirt.
- Check all bolts, screws, and connections periodically and tighten as needed.
- Inspect the suspension chains for signs of rust or wear and replace if necessary.
- Apply a weather-resistant sealant to the wood to protect against moisture and UV damage.
- Store the swing indoors or cover it during harsh weather conditions to prolong its lifespan.
You can also download a copy of the Outsunny 2 Seater Porch Swing Chair Seat with Cup Holders Manual(PDF) for future reference.
For technical support, replacement parts, or product questions,contact Aosom LLC’s Customer Service and get friendly assistance.
FAQs
1. What should I do if my swing starts squeaking?
If your swing starts squeaking, check the bolts and screws to ensure they are tightened properly. Apply a lubricant like WD-40 to the joints or suspension chains to reduce friction and eliminate the squeak.
2. How do I secure the swing in a windy area?
In windy areas, consider securing the swing with weight at the base or anchoring it to a stable structure to prevent it from tipping or swaying excessively. Make sure to check the chains and hooks for tightness.
3. What should I do if the suspension chains are too short or too long?
If the suspension chains are too short or long, you can adjust their length by removing or adding links. Ensure that both sides are even and the swing hangs at your preferred height.