Designed for modern outdoor spaces, this set of two rattan dining side chairs combines clean lines with dependable construction. Featuring a durable polyethylene rattan seat, a sturdy iron frame, and X-frame side support, these chairs offer both style and stability for everyday outdoor dining.
Parts List
- A – Seat (1 piece)
- B – Chair Legs (1 piece)
Hardware List
- ① – Bolt (M6X20mm) (5 pieces)
- ② – Spring Washer (5 pieces)
- ③ – Washer (5 pieces)
- ④ – Cap (5 pieces)
- ⑤ – Allen Key (1 piece)
Assembly Preparation
- Read all instructions carefully before beginning assembly.
- Ensure all parts and hardware are present and accounted for.
- Two adults are recommended to complete the assembly safely.
- Do not assemble the product on carpet or finished flooring.
- Assemble on a clean, flat, non-marring surface such as packing foam.
- Keep all packaging materials until assembly is fully completed.
Assembly Steps
Follow the steps below to assemble your APANAGE Outdoor Rattan Dining Side Chair safely and correctly.
Step 1: Position the Main Components
- Place the Seat (A) face down on the prepared assembly surface.
- Position the Chair Legs (B) near the seat, ready for alignment in the next step.
Step 2: Attach the Seat to the Chair Legs
- Align the Seat (A) with the Chair Legs (B) as shown in the illustration.
- Insert Bolts (①) through the frame, then add Spring Washers (②) and Washers (③).
- Tighten the bolts using the Allen Key (⑤), but do not fully tighten at this stage.
- Ensure the front legs are positioned higher and the back legs lower before continuing.
Step 3: Align and Secure the Chair
- Turn the chair upright and place it on a level surface.
- Apply gentle downward pressure on the seat using both hands to help the seat and legs align properly.
- Check the chair for any wobbling on the surface.
- If the chair is stable, tighten all bolts gradually in a sequential order until fully secured.
- Do not fully tighten one bolt at a time, tighten all bolts evenly.
- If wobbling remains, loosen the bolts and repeat the alignment process.
Step 4: Install the Bolt Caps
- Turn the chair upside down carefully on a clean surface.
- Place the Caps (④) over the exposed Bolts (①).
- Press each cap firmly until it is fully seated and secure.
Step 5: Completion
- Your Outdoor Rattan Dining Side Chair is now ready for use.
- Use the chair only on a flat and level surface.
Care & Maintenance
- Do not place hot items directly on the furniture surface.
- Do not clean the furniture with harsh cleaners or polish.
- To extend the product’s lifespan, minimize exposure to direct sunlight.
- Children should not climb or jump on the furniture.
- Do not write on the furniture without a padded barrier to protect the surface.
- Avoid prolonged exposure to rain, snow, and direct sunlight; cover the product or place it under a patio or awning when possible.
- For residential use only, not intended for commercial use.
- Remove stains using a mild soap solution and a damp cloth.
- Keep the furniture away from sources of ignition.
- Dust and clean spills using a clean, non-colored, lint-free cloth.
Thank you for choosing the APANAGE Outdoor Rattan Dining Side Chair Set (SKU: F-APA-65487). With proper assembly and regular care, these chairs will provide reliable comfort, stability, and modern style for your outdoor dining space. If you need assistance, replacement parts, or have any questions, our Aosom Customer Support is always ready to help.
FAQs
1. What should I do if the chair legs are slightly misaligned after assembly?
If the legs appear misaligned, loosen the bolts and reposition the legs so they align correctly. Once aligned, tighten the bolts evenly in a sequential order to secure the frame properly and prevent any misalignment.
2. How can I ensure my chair lasts longer in hot climates?
To prevent damage from prolonged sun exposure, place the chair in a shaded area or use a protective cover when not in use. Additionally, periodically clean the rattan seat to remove dust and debris, which can accelerate wear in harsh weather conditions.
3. The chair feels slightly unstable. What might be causing this?
Instability could be caused by loose or unevenly tightened bolts. Double-check that all bolts are tightened securely and evenly. If the chair is still unstable, ensure it’s positioned on a flat surface and that no legs are uneven.