Outsunny Set of 2 Garden Sculptures, Heron Garden Statues Assembly Manual (SKU: 844-751V00MX)

Pair of heron garden sculptures standing on a wooden patio

The Outsunny Set of 2 Garden Sculptures, Heron Garden Statues (SKU: 844-751V00MX) are designed to bring beauty and elegance to your outdoor space. These two heron statues, measuring 29″ and 27.5″, feature a stunning blue finish. They are perfect for gardens, patios, lawns, and backyards. One heron is posed in an alert stance with wings spread, while the other is in a resting position.

Warning & Safety Instructions

Before assembling or using the ornaments, please read and follow these important safety guidelines:

Adult assembly is required. Keep small parts away from children during the setup.
Always place the sculptures on a flat, stable surface to prevent tipping.
Ensure all parts are fully connected and locked in place before moving the statues.
Use the included ground stakes to secure the statues in windy conditions.
Regularly check that the sculptures remain secure and the metal fittings are tight.

Unboxing Your Sculptures: What’s Included

Parts List:

Individual metal components for heron garden statue assembly labeled A-H.

A: Bird 1: Head and Neck Section (1 PC)
B: Bird 1: Main Body Section (1 PC)
C: Bird 1: Leg and Base Section (1 PC)
D: Bird 1: Wing Set (1 PC)
F: Bird 2: Head and Neck Section (1 PC)
G: Bird 2: Main Body Section (1 PC)
H: Bird 2: Leg and Base Section (1 PC)

Hardware List:

E: Ground Stakes/Anchors (4 PCS)

Assembly Preparation

Read all instructions carefully before starting the assembly.
Identify all parts (A through H) to ensure all components are present.
Assemble the statues on a clean, flat surface to prevent damage to the decorative finish.
Save all packaging material until the sculptures are fully assembled and securely standing.

Step-by-Step Assembly Instructions

The Outsunny Set of 2 Garden Sculptures, Heron Garden Statues assembly is divided into two steps, one for each (first and second). Each bird is assembled in a slightly different pose, with the first bird having raised wings and the second bird having its wings tucked and a resting posture.

Step 1: Assemble the First Heron (Upright Pose, 29″)

Assembly instructions for 29 inch upright pose heron garden statue.

1.1: Attach the Body (Part B) to the Legs (Part C)

Take Part B (Main body section) and Part C (Leg and base section).
Slide the body onto the base and legs. Ensure the connection is secure.

1.2: Install the Neck (Part A)

Insert Part A (Head and neck section) into the designated slot at the front of Part B (Main body section).
Make sure the neck is seated fully into the body.

1.3: Attach the Wings (Part D)

Take Part D (Wing set) and insert it into the slot on the back of Part B.
Push the wings in until they lock securely.

1.4: Secure to Ground (Part E)

Position the heron statue in your desired location.
Use the Ground Stakes (E) to secure the base (Part C) into the ground, driving them into the soil to ensure stability.

Step 2: Assemble the Second Heron (Resting Pose, 27.5″)

Assembly steps for 27.5 inch resting pose heron garden sculpture.

2.1: Attach the Body (Part G) to the Legs (Part H)

Take Part G (Main body section) and Part H (Leg and base section).
Attach the body to the base by sliding Part G onto Part H. Ensure the connection is firm.

2.2: Install the Neck (Part F)

Insert Part F (Head and neck section) into the slot at the front of Part G (Main body section).
Ensure the neck is seated properly and securely.

2.3: Secure to Ground (Part E)

Position the second heron in your desired location.
Insert the remaining two Ground Stakes (E) into the base (Part H) and drive them into the soil to anchor the statue firmly.

Step 3: Final Check

Set of two blue and white metal heron garden statues.

Verify that all parts are securely connected and locked into their respective slots.
Check that the ground stakes are fully inserted into the soil to prevent wobbling or tipping.
Adjust the positioning of the statues if needed to ensure they stand balanced.

Troubleshooting Guide

Issue	Possible Cause	Solution
Neck feels loose	Not fully inserted	Firmly push the neck (A or F) downward until it seats completely in the body slot.
Heron is unstable	Uneven ground	Move the statue to a flatter surface or level the soil beneath the circular base.
Statue tips over	Stakes not secure	Ensure the ground stakes (E) are driven fully into firm soil.

Care & Maintenance

For cleaning, do not use harsh chemical cleaners or abrasive materials. Wipe with a soft, damp cloth.
To prevent long-term weathering, consider applying a clear outdoor protective spray to the metal surfaces.
During extreme weather, such as heavy snow or high winds, it is recommended to move the ornaments to a sheltered area.
Check the stability of the ground stakes periodically, especially after heavy rain.
For residential outdoor use only.

With proper assembly and regular care, your Outsunny Garden Ornaments will serve as a reliable and beautiful addition to your home landscape.

For technical support or product questions, contact Aosom LLC’s Customer Service and get friendly assistance.

You also Download Assembly Manual PDF for future reference

Download Manual

FAQs

1. Why does the neck of the heron feel loose after assembly?

If the neck feels loose, it may not be fully inserted. Ensure the neck (Parts A or F) is pushed firmly into the designated slot in the body (Parts B or G). This should secure the neck in place and prevent wobbling.

2. Why is my heron statue tipping over?

The most common cause of tipping is unsecured ground stakes. Ensure that the ground stakes (Part E) are fully driven into firm soil. This will stabilize the statue and prevent it from toppling over.

3. How do I assemble the wings properly if they aren’t fitting?

If the wings (Part D) are not fitting correctly, ensure that they are inserted into the designated slot on the back of the body (Part B). Push them in until they lock securely into place.