HOMCOM Nesting End Tables Set of 3 Assembly Manual-SKU:839-608V00BN

The HOMCOM Nesting End Tables Set of 3 SKU:839-608V00BN is a stylish and functional solution for any living space. Featuring a unique C-shaped design, a sturdy steel frame, and a rustic brown finish, these tables are perfect for providing easy access to drinks, snacks, or electronics while saving space.

The set includes three tables of different sizes, ideal for use near your sofa, bed, or anywhere you need extra surface area. Assembly is quick and straightforward, following these easy-to-understand instructions.

Parts & Hardware List

Part No.	Quantity	Description
1	1	Large Table Top Panel
2	2	Large Side Frames
3	2	Large Cross Bars
4	1	Medium Table Top Panel
5	2	Medium Side Frames
6	2	Medium Cross Bars
7	1	Small Table Top Panel
8	2	Small Side Frames
9	2	Small Cross Bars

Hardware List

Hardware	Quantity	Description
A	12 (+1 spare)	M6 × 30 Screws
B	12 (+1 spare)	M6 × 40 Screws
C	12 (+1 spare)	Adjustable Leveling Feet
Y	1	M5 Allen Key

Tools Recommended

• Allen Key (included)
• Adjustable Wrench or Spanner
• Flat-head Screwdriver (optional)

Estimated Assembly Time: Approx. 45 minutes
Recommended People: 1 adult

Safety Instructions

• Assemble on a flat, stable surface.
• Ensure all screws are fully tightened before use.
• Keep children and pets away during assembly.
• Do not overtighten screws to avoid damaging the frame.

Assembly Instructions

When you are going to assemble your Nesting End Tables Set of 3 follow these steps carefully and enjoy this smooth process of assembly.

Step 1: Assemble the Metal Frames

Parts Used:

• 2: Side Frame Sections (Parts 2, 5, 8)
• 3: Cross Bars (Parts 3, 6, 9)
• Y: M5 Allen Key

Instructions:

1. Take the Side Frame Sections (Parts 2, 5, 8) and lay them on a flat surface for each table (large, medium, small).
2. Attach the Cross Bars (Parts 3, 6, 9) between the side frames as shown in the diagram.
3. Align the holes of the Side Frame Sections and Cross Bars for easy insertion of screws.
4. Insert Screws B (M6 × 40) through the holes and secure the side frames to the cross bars.
5. Tighten the screws using the M5 Allen Key (Y), but only tighten to 75% initially.
6. Do not fully tighten the screws yet to allow for minor adjustments and ensure everything is square.
7. This step forms the basic metal frame structure for each table, setting it up for the next stages of assembly.

Step 2: Finalize Frame Tightening

Parts Used:

• 2: Side Frame Sections (Parts 2, 5, 8)
• 3: Cross Bars (Parts 3, 6, 9)
• Y: M5 Allen Key

Instructions:

1. After completing Step 1, position the assembled frame on a level surface.
2. Check that the frame is properly aligned, ensuring it is square and stable.
3. Tighten all Screws B (M6 × 40) to 100% using the M5 Allen Key (Y).
4. Ensure that the cross bars and side frames are securely fixed together.
5. Verify the frame’s stability, ensuring there is no wobbling or misalignment before proceeding to the next step.

Step 3: Attach the Wood Table Tops

Parts Used:

• 1: Table Top (Parts 1, 4, or 7)
• 2: Side Frame Sections (Parts 2, 5, 8)
• A: M6 × 30 Screws (4 screws per table)
• Y: M5 Allen Key

Instructions:

1. Take the Wood Table Tops (Parts 1, 4, or 7) and position them onto the assembled frame.
2. Align the holes of the Table Top with the holes on the Side Frame Sections (Parts 2, 5, or 8).
3. Insert Screws A (M6 × 30) through the holes and into the frame.
4. Use the M5 Allen Key (Y) to tighten the screws evenly.
5. Tighten the screws to 100%, ensuring the tabletop is firmly attached to the frame.
6. Check the alignment of the tabletop to make sure it’s centered and secure.

Step 4: Install Leveling Feet

Parts Used:

• C: Adjustable Leveling Feet (x4)
• Y: M5 Allen Key

Instructions:

1. Take the Adjustable Leveling Feet (C) and screw them into the bottom of each Side Frame Section (Parts 2, 5, 8).
2. Ensure the feet are securely attached to the frame.
3. The Leveling Feet (C) are designed to be hand-tightened, so turn them by hand to adjust the height of the tables for stability on uneven floors.
4. If the feet are stiff or difficult to turn, use the M5 Allen Key (Y) to make adjustments.
5. Tighten each foot to ensure that the table sits evenly and stable, preventing any wobbling.
6. Check the stability of the tables and make sure the frames are level.

Final Step: Completed Tables

• After following all the previous steps for assembly, including tightening all screws and installing the leveling feet, the tables should now be fully functional and ready for use.
• The nesting design of these tables allows you to place them one inside the other, saving space when needed.
• Your HOMCOM Nesting End Tables Set of 3 is now fully assembled and ready for use. Enjoy the convenience and style of this versatile set in your living room, bedroom, or any other spa.

Usage Tips

• Use on flat, level surfaces for maximum stability.
• Clean with a soft cloth and mild detergent; avoid abrasive cleaners.
• Periodically check and tighten screws to maintain stability.

Care & Maintenance

• Wipe the wooden surfaces regularly with a soft, damp cloth to remove dirt, spills, and residue.
• Inspect all screws, support legs, and frames from time to time. Tighten them if any loosening is detected.
• Periodically apply a suitable wood treatment or protective oil to maintain the finish and protect from moisture and sun exposure.
• Avoid prolonged exposure to standing water. After rainfall, wipe the surface dry to prevent water damage.
• When not in use for extended periods or during harsh weather, store the table in a sheltered area or cover it to extend its lifespan.

You can also download the HOMCOM Nesting End Tables Set of 3 manual for your reference.

For technical support, replacement parts, or product questions,contact Aosom LLC’s Customer Service and get friendly assistance.

FAQs