The HOMCOM Industrial Dining Table Set for 2 combines a counter-height table with two matching stools and integrated side shelving. Designed for compact kitchens and dining spaces, the rustic brown tabletop pairs with a sturdy metal frame for everyday use. The built-in shelves provide convenient storage for essentials, while the straightforward assembly process ensures the set can be put together smoothly by following the steps in sequence.
Warning & Safety Instructions
Before starting assembly, carefully read and follow these safety guidelines:
- For domestic use only
- Adult assembly is required
- Assemble on a flat, stable surface
- Keep children and pets away during assembly
- Check that all parts and hardware are included before starting
- Do not use the product if any part is damaged or missing
- Do not overtighten screws during assembly
- Avoid placing the product near open flames
- Use indoors only and keep away from excessive moisture
- Periodically check and retighten all fasteners after assembly
Unboxing Your Set: What’s Included
When you unbox your HOMCOM Industrial Dining Table Set SKU: 835-338 you will find the following things in it.
Parts List
| Part | Quantity | Description |
| 1 | 1 | Main Table Leg Frame – Left |
| 2 | 1 | Main Table Leg Frame – Right |
| 3 | 1 | Side Shelf Vertical Frame |
| 4 | 1 | Large Table Top Panel |
| 5 | 4 | Upper Support Bars |
| 6 | 3 | Side Shelf Panels |
| 7 | 2 | Lower Cross Bars |
| 8 | 1 | Bottom Support Panel |
| 9 | 4 | Stool Side Leg Frames |
| 10 | 8 | Stool Support Cross Bars |
| 11 | 2 | Stool Seat Panels |
Hardware List
| Part | Quantity | Description |
| A | 8 | M6 × 12 Screws |
| B | 16 | M6 × 30 Screws |
| C | 22 | M6 × 40 Screws |
| D | 12 | M7 × 48 Screws |
| E | 14 | Adjustable Foot Pads |
| F | 1 | Allen Key |
Note: Spare fasteners are included.
Assembly Preparation
- Assemble the set on a clean, dry surface
- Place cardboard or a soft cloth underneath to protect flooring
- Do not fully tighten screws until instructed
- Ensure frames are square before final tightening
Step-by-Step Assembly Instructions
Please carefully follow these assembly instructions to make your table useful for you without any tension.
Step 1: Assemble the Stool Frames
- Place two Stool Side Leg Frames (9) upright on a flat, stable surface with the inner holes facing each other.
- Position the Stool Support Cross Bars (10) between the leg frames, aligning two bars at the upper section and two at the lower section as shown.
- Insert the M6 × 40 Screws (C) through the aligned holes in the leg frames and cross bars.
- Tighten the screws using the Allen Key, ensuring the frame remains square but avoiding overtightening at this stage.
- Screw one Adjustable Foot Pad (E) into the bottom of each leg to allow height adjustment and stability.
- Once all parts are properly aligned, fully tighten all screws to secure the stool frame.
- Repeat the same process to assemble the second stool frame.
Step 2: Attach the Stool Seat Panels
- Place the Stool Seat Panel (11) on top of the assembled stool frame, ensuring it sits evenly on all four sides.
- Align the pre-drilled holes on the underside of the Stool Seat Panel (11) with the holes on the upper frame of the stool.
- Insert the M6 × 30 Screws (B) through the aligned holes from underneath the stool frame.
- Tighten each screw evenly using the Allen Key to secure the seat firmly in place.
- Make sure the stool seat is level and does not shift once secured.
- Repeat the same steps to attach the second Stool Seat Panel (11) to the remaining stool frame.
Step 3: Assemble the Main Table Frame
- Place the Main Table Leg Frame – Left (1) and Main Table Leg Frame – Right (2) upright on a flat surface, positioned parallel to each other.
- Align the Lower Cross Bars (7) between the two leg frames at the upper inner sections, ensuring the holes line up correctly.
- Insert the M6 × 40 Screws (C) through the aligned holes to secure the cross bars to both leg frames.
- Position the Bottom Support Panel (8) between the lower sections of the table frames as shown.
- Secure the Bottom Support Panel (8) using the M6 × 40 Screws (C), tightening evenly on both sides.
- Screw one Adjustable Foot Pad (E) into the bottom of each table leg to provide stability and height adjustment.
- Once all components are properly aligned, fully tighten all screws to complete the main table frame assembly.
Step 4: Attach the Upper Support Bars
- Position the Upper Support Bars (5) along the top inner edges of the assembled table frame, as shown in the image.
- Align each Upper Support Bar (5) with the pre-drilled holes on the Main Table Leg Frames (1) and (2).
- Insert the M6 × 12 Screws (A) through the aligned holes to secure each support bar in place.
- Ensure all four Upper Support Bars (5) are correctly positioned, forming a stable rectangular support frame at the top.
- Tighten the screws evenly using the Allen Key, making sure the frame remains square and properly aligned.
Step 5: Attach the Side Shelf Frame and Shelf Panels
- Position the Side Shelf Vertical Frame (3) against the right side of the assembled table frame, aligning the pre-drilled holes as shown.
- Secure the Side Shelf Vertical Frame (3) to the table structure using M7 × 48 Screws (D).
- Insert the Side Shelf Panels (6) into the shelf frame, positioning them evenly from top to bottom.
- Align the holes on each Side Shelf Panel (6) with the corresponding holes on the frame.
- Fasten each shelf panel using the M7 × 48 Screws (D), tightening the screws evenly to keep the shelves level.
- Attach the Adjustable Foot Pad (E) to the bottom of the side shelf frame leg to provide stability and proper height adjustment.
- Once all components are aligned correctly, fully tighten all screws to secure the shelf structure.
Step 6: Attach the Large Table Top Panel
- Carefully place the Large Table Top Panel (4) onto the assembled table frame, ensuring it sits evenly on all sides.
- Align the pre-drilled holes on the underside of the Large Table Top Panel (4) with the holes on the upper support frame.
- Insert the M6 × 30 Screws (B) through the aligned holes as shown in the diagram.
- Tighten each screw evenly using the Allen Key to secure the tabletop firmly to the frame.
- Check that the tabletop is properly aligned and does not shift.
- Once alignment is confirmed, fully tighten all screws to complete the table assembly.
Troubleshooting Guide
| Issue | Possible Cause | Solution |
| Table feels unstable | Uneven floor or loose feet | Adjust foot pads and retighten |
| Stool wobbles | Screws not fully tightened | Check and tighten all fasteners |
| Shelves not level | Frame misalignment | Loosen, realign, and retighten |
| Screws difficult to insert | Holes not aligned | Adjust parts slightly and retry |
Care & Maintenance
- Clean with a soft, dry or slightly damp cloth
- Do not use abrasive cleaners or harsh chemicals
- Check and retighten screws periodically
- Use indoors only on level flooring
- Avoid prolonged exposure to moisture
Downloadable Manual
You can also download the HOMCOM Industrial Dining Table Set for 2 assembly manual for your reference.
Need Assistance?
If you have any questions about the product, warranty, returns, or general use, please contact Aosom Customer Support for assistance.
FAQs
Check the adjustable foot pads first and level them on the floor. Loosen nearby screws slightly, realign the frame, then retighten evenly. A flat surface makes a big difference for counter-height table stability.
Do not force the screw, as this can damage threads. Back it out, realign the holes by adjusting the frame, and try again slowly. Starting screws by hand before using the Allen key helps prevent issues.
Yes, the set can be taken apart if needed for moving or storage. Keep screws grouped by size and label major parts during disassembly. Avoid repeated overtightening to protect the screw holes over time.