The Outsunny Wooden Porch Rocking Chair (84A-041WR) combines comfort, durability, and classic style. With its solid wood frame and smooth rocking base, this chair is perfect for porches, patios, gardens, or indoor relaxation.

Estimated Assembly Time: 40–60 minutes
Recommended Assembler(s): 2 adults

Warning and Safety Instructions

• Assemble only on a flat, stable, and dry surface.
• Do not confuse similar screws or boltscheck carefully before use.
• Do not fully tighten screws until all parts are in place.
• Keep packaging and small parts away from children and pets.
• Maximum weight capacity: 250 lbs (113 kg).
• Do not stand on the chair or use it as a step stool.
• Avoid exposure to open flames or prolonged high heat.
• For outdoor use, keep under a covered area or use a protective furniture cover.
• Re-tighten screws regularly to maintain stability.

Unboxing: What’s Inside

Parts

• Backrest Panel (slatted back piece)
• Left Armrest with Side Frame
• Right Armrest with Side Frame
• Seat Panel (curved slatted seat)
• Front Support Bar
• Back Support Bar
• Middle Support Bar
• Left & Right Rocker Legs (2 pieces)

Hardware List

• Bolt (M6 × 50 mm) – ×12 (+1 spare)
• Wood Caps – ×12
•  Allen Key – ×1
• Screw (M4 × 40 mm) – ×4

Assembly Instructions

Now you are carefully going to assemble your Outsunny Wooden Porch Rocking Chair (84A-041WR) just follow these steps and keep going on.

Step 1: Attach Rocker Legs

• Take Left Armrest Frame (B) and Right Armrest Frame (C).
• Align each Rocker Leg (H) at the bottom of the frames.
• Secure each rocker leg using Screws DD (x4).
• Ensure both rocker legs are firmly fixed and flush to the side frames before moving on.

Step 2: Attach the Backrest

• Take the Backrest Panel (A) and the Right Armrest Frame (C).
• Align the side of the backrest (A) with the inside of the armrest frame (C).
• Secure it using Screws AA (x2).
• Tighten with the Allen Key (CC) but do not overtighten yet.
• Ensure the backrest is upright and flush with the side frame.

Step 3: Attach the Seat and Support Bars

• Take the Seat Panel (D) and align it with the Right Armrest Frame (C).
• Position the Front Support Bar (F) and Back Support Bar (G) between the side frames.
• Secure everything using Screws AA (x4).
• Tighten screws with the Allen Key (CC) but avoid overtightening until all parts are in place.
• Make sure the seat sits firmly and both support bars are level.

Step 4: Secure Backrest, Seat, and Support Bars

• Take the backrest (A) and align it with the left frame (B) and right frame (C).
• Position the seat (D) and ensure it sits flush with the side frames.
• Insert the lower crossbar (E), middle support bar (F), and upper support bar (G) between the frames.
• Use AA bolts (x6) to fasten all connections securely.
• Tighten bolts with the Allen wrench (CC), but do not overtighten.

Final Step: Cover Screw Heads

• Take the BB screw covers (x12).
• Insert each cover into the exposed screw holes on the left frame (B) and right frame (C).
• Press firmly to ensure all covers are secure and flush with the surface.

Final Touches & Care

• Place the chair on a flat surface and test the rocking motion.
• Wipe clean with a damp cloth; avoid harsh chemicals or abrasives.
• For outdoor use, apply a wood sealer periodically to protect against weather damage.
• Store indoors or cover during heavy rain or winter months.

Maintenance Tips

• Check and tighten screws/bolts every 2–3 months.
• Do not exceed the maximum weight capacity.
• Reapply protective finish yearly if used outdoors.
• Keep away from standing water to prevent wood warping.

When to Call a Professional

• If any panels arrive cracked, warped, or misaligned.
• If bolts or screws cannot be secured due to faulty threading.
• If rocker legs do not sit evenly after full assembly.

User Guide

• Sit centrally and rock gently to avoid sudden leaning to prevent tipping.
• Do not allow children to use unsupervised.
• Not designed for commercial or heavy-duty use.

Ready for Use

Your Outsunny Wooden Porch Rocking Chair is now ready. With proper assembly, care, and maintenance, it will provide comfortable relaxation and timeless charm for years to come.

You can also Download Outsunny Wooden Porch Rocking Chair (SKU: 84A-041WR) for your reference. 

FAQs

1. What should I do if the chair wobbles after assembly?

Check that all bolts are tightened evenly without overtightening. Place the chair on a truly flat surface. If wobbling continues, add floor protectors or recheck alignment of rocker legs.

2. How can I protect the chair from outdoor weather damage?

Use a breathable furniture cover when not in use. Apply a wood sealer or protective finish yearly. Keep the chair under a porch roof or shaded area to reduce direct rain exposure.

3. What if the screws loosen over time?

Inspect all screws every 2–3 months. Tighten them using the provided Allen key or a matching tool. For persistent loosening, use a furniture-safe thread locker.

4. Can I restore the finish if the wood fades?

Yes, lightly sand the affected areas with fine sandpaper. Wipe clean, then apply a wood stain or outdoor furniture oil. Allow it to dry completely before using the chair again.