Outsunny Patio Wicker Dining Table with Umbrella Hole Assembly Manual (SKU:867-137V00MB)

The Outsunny Outdoor Rattan Dining Table (SKU: 867-137V00MB) is the perfect addition to your patio or garden, offering both style and functionality. This versatile square table serves as an ideal gathering spot, allowing you to enjoy outdoor meals, drinks, or games with family and friends. 

Made from a durable steel frame with hand-woven PE rattan in a mixed brown finish, it ensures longevity and rustic charm, while the included umbrella hole and protective footpads provide added convenience and floor protection.

Before You Begin

• Estimated Assembly Time: 30 Minutes
• Recommended Personnel: 2 adults

Assembly Precautions

• Ensure you have all parts and hardware before starting.
• Assemble the table on a soft surface such as carpet or cardboard to prevent scratching the components during assembly.
• Do not fully tighten screws until all parts are assembled. This allows for easier alignment and adjustment.
• Keep all hardware and tools away from children during assembly.

Parts & Hardware

Parts List

• A (x01): Table Top
• B (x01): Leg Frame 
• C (x04): Curved Legs

Hardware List

• D (x08): M6×15 screws
• E (x08): M6×25 screws
• F (x16): Washers
• G (x01): Allen key

Follow these steps carefully and proceed sequentially to assemble your outsunny patio wicker dining table.

Step 1: Attach Curved Legs to Leg Frame

1. Place the Table Top (A) on a flat, soft surface with the mounting points facing upward.
2. Position one curved leg (C) at each corner of the Table Top (A), aligning the pre-drilled holes on the leg with the corresponding holes on Table Top (A).
3. For each connection point, place a washer (F) onto an M6×15 screw (D).
4. Insert the screw through the washer and curved leg, then thread it into the leg frame.
5. Use the Allen key (G) to loosely tighten each screw. Do not fully tighten at this stage.
6. Repeat this process for all four curved legs (C), ensuring each leg is securely positioned at its designated corner.
7. Once all four legs are attached, check the alignment and adjust if necessary before proceeding to the next step.

Step 2: Attach Leg frame to Curved Legs

1. Carefully flip the leg frame (B) with attached curved legs (C) upside down, so the top ends of the curved legs are facing upward.
2. For each connection point, place a washer (F) onto an M6×25 screw (E).
3. Insert the screw through the washer and thread it into the curved leg (C).
4. Use the Allen key (G) to loosely tighten each screw at all four connection points.

Step 3: Final Assembly Check

1. Ensure the table is standing upright on a flat, level surface.
2. Check that all screws from Step 1 and Step 2 are fully tightened using the Allen key (G).
3. Tighten in a diagonal pattern to maintain balance and stability.
4. Inspect all connection points to ensure there are no loose screws or wobbly parts.
5. Test the stability of the table by gently applying pressure to the table top from different angles.
6. Wipe down the table surface with a clean, damp cloth to remove any dust or debris from assembly.

Your Outsunny Patio Wicker Dining Table with Umbrella Hole is now ready for outdoor use! Place it in your desired location, patio, garden, balcony, or deck and enjoy gathering with family and friends.

Safety Precautions

• The maximum weight capacity is 110 lbs (50 kg). Do not exceed this limit to prevent structural damage or injury.
• When using an umbrella with the table, ensure the umbrella pole diameter does not exceed 1.5 inches (3.8 cm) to fit properly through the umbrella hole.
• Do not stand, climb, or sit on the table, as this may cause damage or personal injury.
• Regularly inspect all screws and connections to ensure they remain tight and secure. Retighten if necessary.
• Keep the table away from open flames, fire pits, grills, or other heat sources to prevent damage.

Care & Maintenance

• Regular Cleaning: Wipe the table surface with a soft, damp cloth and mild soap to remove dirt, dust, and spills. Avoid using harsh chemicals, abrasive cleaners, or scouring pads that may damage the finish.
• Seasonal Storage: During off-season months or extreme weather conditions, store the table in a dry, covered area such as a garage or shed to prolong its lifespan.
• Protective Cover: When not in use, cover the table with a weather-resistant furniture cover to protect it from UV rays, rain, snow, and dirt.

For technical support, replacement parts, or product questions,contact Aosom LLC’s Customer Service and get friendly assistance.

FAQs

1. Can I use this table without an umbrella? 

Yes, the umbrella hole is optional. You can use the table without an umbrella for regular dining or games, and the hole can be left open for drainage or covered with a decorative plug.

2. What size umbrella base do I need for this table? 

The table doesn’t include an umbrella base, so you’ll need to purchase a separate freestanding base weighing 30-50 lbs depending on your umbrella size and local wind conditions.

3. Can I paint or change the color of the rattan? 

Painting PE rattan is not recommended as paint may crack or peel due to outdoor exposure and material flexibility. Consider using removable table covers or decorative tablecloths for a different look.