The HOMCOM 5-Tier Glass Display Cabinet (SKU: 833-761V00RB) offers a stylish way to showcase collectibles, shot glasses, and keepsakes. With two full-size glass doors and four adjustable shelves, it provides flexibility for different item sizes while keeping everything neatly organized. Its wall-mounted design saves space and adds a modern touch to any room, making it both functional and decorative.
Important Safety Instructions
- Read all instructions carefully before assembly.
- Assemble the product on a flat, clean surface.
- Keep all hardware and small parts away from children.
- Do not use power tools to tighten hardware; overtightening may damage parts.
- Two adults are recommended for safe assembly.
Parts List
- ① x1 – Top Panel
- ② x1 – Bottom Panel
- ③ x1 – Back Panel
- ④ x1 – Glass Door (Left)
- ⑤ x1 – Glass Door (Right)
- ⑥ x1 – Middle Panel
- ⑦ x1 – Divider Panel
- ⑧ x4 – Adjustable Glass Shelves
Hardware List
- A x8 (+1 spare) – Screws 4x40mm
- B x16 (+1 spare) – Screws
- C x16 – Cam Locks
- D x4 (+1 spare) – Screws 4x16mm
- E x2 – Brackets
- F x2 – Wall Anchors with Screws
- G x1 – Shelf Pegs Set
How to Assemble HOMCOM 5-Tier Glass Display Cabinet
Follow the steps below to assemble the HOMCOM 5-Tier Glass Display Cabinet securely. Careful installation of panels, shelves, and glass doors will ensure stability and safe wall mounting.
Step 1: Assemble the Frame
- Position the Top Panel ① and Bottom Panel ②.
- Align both with the Back Panel ③.
- Secure them using Screws A x4.
- Insert Shelf Pegs G into the pre-drilled holes on Panel ③.
Step 2: Install the First Glass Door
- Take Glass Door ④ and place it at the front of the cabinet.
- Slide the door carefully into the grooves of Top Panel ① and Bottom Panel ②.
- Push it across until it sits properly and moves smoothly.
Step 3: Install the Second Glass Door and Shelves
- Insert Glass Door ⑤ into the grooves of Top Panel ① and Bottom Panel ②, placing it in front of Glass Door ④.
- Make sure both doors slide smoothly and overlap correctly in the center.
- Place the Glass Shelves ⑧ (x4) onto the Shelf Pegs G at your desired height inside the cabinet.
Step 4: Attach the Middle Support Panel
- Take the Middle Panel ⑥ and position it on the right side of the cabinet frame.
- Align it carefully with the Top Panel ①, Bottom Panel ②, and Back Panel ③.
- Secure it firmly in place using Screws A x4 together with Shelf Pegs G as shown in the diagram.
- Make sure the panel is straight and tightened evenly to keep the cabinet stable.
Step 5: Lock the Shelves in Place
- Tighten the Cam Locks C (x16) to secure all Glass Shelves ⑧.
- Make sure each shelf is firmly fixed, level, and stable.
- Do not overtighten, as this may damage the glass or hardware.
Step 6: Attach the Back Panel and Mounting Brackets
- Take the Back Panel ⑦ and align it with the frame.
- Secure it to the cabinet using Screws B x16 around the edges.
- Next, fix the Brackets E x2 to the top of the back panel with Screws D x4.
- These brackets will be used to safely mount the cabinet to the wall.
- Ensure the back panel is flat, and all screws are tightened evenly.
Step 7: Wall Mounting (Final Step)
- Position the cabinet against the wall at your desired location.
- Use a drill to make holes in the wall that align with the Mounting Brackets E.
- Insert the Wall Anchors and Screws F x2 into the holes.
- Secure the cabinet to the wall by tightening the screws through the brackets.
- Ensure the cabinet is firmly fixed and does not move before placing items inside.
Maintenance and Care
- Wipe with a soft, dry cloth, avoid harsh cleaners.
- Clean glass doors with glass cleaner and microfiber cloth.
- Re-tighten screws and fittings every few months.
- Do not exceed 4.4 lbs (2 kg) per shelf.
- Keep away from humidity, sunlight, and heat sources.
- Check wall brackets regularly to ensure secure mounting.
Assembly Complete
Your HOMCOM 5-Tier Glass Display Cabinet is now fully assembled and ready for use. Ensure it is mounted securely to the wall before adding your items.
User Guide
You can also download the HOMCOM 5-Tier Glass Display Cabinet Manual (PDF) for your reference.
FAQs
1. Why are the glass doors not sliding smoothly?
Check if the top and bottom panels are perfectly aligned. Misalignment can cause friction. Loosen the screws slightly, realign the panels, then retighten carefully.
2. What should I do if the glass shelves rattle?
The shelf pegs may not be fully seated in the holes. Remove the shelf, push the pegs firmly into place, and reposition the glass evenly on top.
3. How can I hide small gaps between the back panel and frame?
Gaps usually occur if screws are unevenly tightened. Loosen the screws slightly, press the back panel flush, and re-tighten evenly from corner to corner.
4. What if the cabinet feels unstable after mounting?
Verify the wall anchors are installed into solid material, not hollow or crumbling surfaces. If necessary, replace with stronger anchors suitable for your wall type.
5. Can I adjust the shelf heights after assembly?
Yes, the shelves can be repositioned at any time. Simply remove the glass shelf, move the shelf pegs to a new position, and place the shelf back.